Site icon French Ethereal

Repair & Repaint: Making New Seats for Our Dining Room Chairs

Advertisements

Today I thought I’d share how I recently repaired our dining room chairs. I like the Shabby Chic look very much, but these French-style chairs have been getting shabbier as each year passes. It was time to give them a refresh…

These two photographs were taken in our former garage back in California (above and below).
 
 
 

I refinished these  thrift store chairs  the first year I began blogging. Two chairs are now in need of new seats as their seat caning has ripped out, and they all need some TLC with fresh coats of paint.

So over several weekends, Mr. Ethereal helped me set up two saw horses and plywood as a small workshop table out in our garage. He also pulled out the jigsaw and the new electric sander for working on this project.

 

.

Creating a pattern

I began by tracing around the top of one chair and transferred that pattern to plywood.

Hubby cut out this first template. I refined this first cutout and adjusted the wood pattern, refining it, shaving off some wood to make the cutout fit better.

The new pattern was adapted to fit each chair as needed with each progressive cutout.

.

Round one done ~ Repairing & Painting next

So after fitting each chair, sanding each piece and wiping them down again, it was time to start fixing loosened chairs.

Two chairs needed their back legs reglued. Using large clamps, the backs and stretchers were pulled together to set. The clamps were kept in place for 24 hours.

When we left California, I kept the original can of white paint and when I bought a replacement I wrote on the can that it was used for painting these chairs. After a quick trip to Lowe’s to have this almost full can shaken, I dry-brushed paint onto each chair.

After drying for 24 hours, each chair was lightly sanded to distress it. Touch up paint was applied on several of the chairs to cover red and blue which had rubbed off chair pads and blue jeans over the years.

Finally, I drilled and set screws into each chair seat piece. These chairs have strong seats now and I am still deciding if I want to refinish the final two chairs or leave them in their original stained state.

I love how these chairs have turned out!

What do you think? Let me know in the comments if you’d leave the remaining two chairs as is, or refinish them.

.

I appreciate your thoughts,

Exit mobile version